Table of Contents
Advertisement
q Lens (Option)
See pages 9, 10, 11, 12 and 13 for details on lens
selection. A standard C-mount lens can be used
with the camera by adding the optional lens mount
converter (C-mount adapter) WV-AD20.
w Flange-back Adjusting Ring
This ring is used to adjust the back focal length or
picture focus by rotating it.
e Video Output jack (VIDEO OUT)
This jack is used to adjust the angular field of view
or focus while observing the picture on the moni-
tor.
r Camera Mounting Screw Hole
This screw hole (1/4" - 20) is used to mount the
camera onto a mounting bracket or a tripod.
t Auto Iris Lens Connector
This 4-pin connector supplies power and the DC
control signal to the auto iris lens.
y Volume Control (VOLUME, MIN/MAX)
The volume control is preset to centre position at
the factory. Adjust it to prevent howling.
u Video level Control (VIDEO LEVEL, L/H)
This control adjusts the level of auto iris control
when the ALC/ELC Switch 1 1 ! 1 is set to ALC posi-
tion, or the level of electronic light control when the
ALC/ELC switch is set to ELC position.
i ATW Balance Control (ATW BALANCE, R/B)
This control adjusts the red and blue colour bal-
ance. It is preset to centre position which usually
provides accurate colour reproduction.
o Power Indicator
!0 Camera Output Connector
This connector is used to connect a coaxial cable
to the CAMERA INPUT of the specified monitor or
camera drive unit, to receive DC power and verti-
cal drive pulse, and supply the audio and video
output of the camera.
!1 ALC/ELC Switch (ALC/ELC)
This switch is used to choose the lens as follows.
ALC: Choose this position when using an auto iris
lens.
ELC: Choose this position when using a fixed or
manual iris lens.
-5-
Advertisement
Table of Contents
