Setup Menu Description - Panasonic WV-BS300 Operating Instruction

Setup Menu Description

Camera
(1) Camera identification (CAMERA ID)
Up to 16 alpha/numeric characters for camera identification can be
displayed near the bottom of the picture.
The ID display "ON" or "OFF" mode is selected by the primary setup
menu and the editing of displayed characters is performed in the
associated submenu.
Note:
Refer to "Camera Identification Setting" on page 9 for more
details.
(2) Light Control (ALC/MANUAL)
The lens iris can be controlled automatically or manually.
• Back Light Compensation (BACK LIGHT COMP)
With conventional cameras, strong background lighting, such as a
spotlight, interferes with the clarity of important scene objects,
making them appear dark. This camera is equipped with a back light
compensation function to overcome this problem.
Setup menu tree, both the ALC light control modes can select either
preset "ON" or "OFF" for back light compensation.
• Factory Setup Mode (PRESET ON)
In normal use, the important object in a
scene is placed in the centre of the
monitor's screen.
mode, more photometric weight is given to
the centre of the screen (where the
important object is located) than to the
edge of the picture (where a bright back
light would most likely be located). In this
mode, even though the back light may vary,
the object at the centre of the screen can
still be clearly seen.
Note:
Refer to "Light Control Setting" on page 10
for detailed procedures.
In the factory setup
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SYNC INT
AUTO PAN OFF
SPECIAL *
<Conventional Camera>
Night
<WV-BS300 Preset ON>
Night
- 6 -
WV-BS300
CAMERA ID
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SYNC INT
AUTO PAN OFF
SPECIAL *
Day
B
Day
B