Panasonic WV-BS300 Operating Instruction page 21

4. Hang the fall prevention wire to the camera
mounting angle.
Be sure to match the wire with the fall
prevention wire fixing angle as shown below.
Ring of the
Fall Prevention
Wire
5. Insert the camera into the camera mounting
angle and rotate the camera clockwise.
Fall Prevention
Wire Fixing Angle
15
6. Tighten the mounting screw (provided).
Notes :
1. Tighten the camera fixing screw with the
screwdriver.
2. Do mount the camera and camera
mounting angle completely as shown in
the following.
3. When removing the camera from the
camera mounting angle, loosen and press
up the camera fixing screw (M3) by using
the screwdriver.
7. Fix the decoration cover to the camera mount-
ing angle.
a. In case of coming the cables from the side.
Pass the cables into the pre-made hole (refer
to "a. The cables come from the side" in
"INSTALLATION") on the decoration cover.
b. In case of going the cable through into the
ceiling.
Push up the decoration cover to the camera
mounting angle.
When using the optional bracket for the
installation, refer to the Operating Instructions
of WV-Q105, WV-Q106, WV-Q107 or WV-Q108 for
details.
- 18 -