Table of Contents
Advertisement
Notes:
1. When the cursor "I" reaches to the end of the "+" position, the cursor "I" jumps to the " " position. At the
same time, the step number of the "COARSE" mode increases one step to enable a continuous adjustment.
The reverse operation takes place when the cursor "I" reaches to the end of the " " position.
2. When the joystick is kept placing to the right or left for more than one second, the cursor "I" moves quickly.
3. When F2 button of WV-CU550A is pressed, both the coarse and fine adjustment are reset to the factory
setup position. (Factory setup position is zero-crossing of the AC line phase as shown below.)
4. If the AC line contains noise (spike noise etc.), the stability of the vertical phase of the camera video output
signal may be disturbed.
7. Auto-Pan Setting
1. To set Auto -pan
Move the cursor to "AUTO PAN" and select either "ON" or "OFF" by
moving the joystick to the left or right.
2. When "AUTO PAN" is selected, set details as follows:
Select "ON" and press the CAM (SET) button to display the "AUTO
PAN" setting menu.
3. To set a panning start position and panning end position
Follow the steps as below:
(1) Move the cursor to "POSITION SET" and press the CAM (SET)
button.
The cursor moves to "START".
(2) Move the joystick to the left or right to select a panning start
position and press the CAM (SET) button.
This determines the start position and the cursor moves to "END".
(3) Move the joystick to the left or right to select a panning end
position and press the CAM (SET) button.
This determines the end position and the cursor moves to
"POSITION SET".
** SYNC **
V PHASE
COARSE
4(1---9)
FINE
......I..
RET
- 14 -
** SYNC **
V PHASE
COARSE
1(1---9)
FINE
+
RET
Setup menu
** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SYNC
AUTO PAN
SPECIAL *
AUTO PAN setting menu
** AUTO PAN **
POSITION SET
START
END
SPEED
...I....
L
ENDLESS
ON
STOP TIME
2S
RET
** AUTO PAN **
POSITION SET
START
END
SPEED
...I....
L
ENDLESS
ON
STOP TIME
2S
RET
** AUTO PAN **
POSITION SET
START
END
SPEED
...I....
L
ENDLESS
ON
STOP TIME
2S
RET
.I.......
+
OFF *
ALC *
OFF
ON
INT
OFF
H
H
H
Advertisement
Table of Contents
