On Screen Display - Panasonic WJ-SX350 Operating Instructions Manual

7-2. Group Sequence
The following function is available only if a Group
Sequence has been previously established through the
Setup Menu. As described on page 31, up to four (4)
Group sequences can be set up.
1. As described earlier, a Group Sequence deter-
mines which monitor is to be assigned to which
camera. Therefore, selecting a monitor is not
required.
2. Select a desired Group Sequence Number (101 to
104) by pressing the Numeric buttons.
1
4
7
MON
ESC
BACK
HISTORY
Note: The first digit 1 stands for the command sig-
nal to activate the Group Sequence. Make sure
the digit 1 is selected first to choose the Group
Sequence.
3. Press the FWD SEQ button to run the sequence in
forward direction, or press the BACK SEQ button
to run the sequence in reverse direction.
SEQUENCE
BACK
SEQ PAUSE
1 CAM
DEC
DEC
4. Press the PAUSE button to pause the running
sequence.
The P sign is inversely displayed at the Group
Sequence Number on the selected monitor.
5. Press the FWD SEQ button to continue a sequence
that was previously paused by the PAUSE button.
The sequence will continue in the forward direction
from the step that was previously paused by the
PAUSE button.
2 3
5 6
8 9
0 CAM
SET
FWD
FWD
SEQ
1 CAM
INC
6. Press the BACK SEQ button to continue a
sequence that was previously paused by the
PAUSE button.
The sequence will continue in the reverse direction
from the step that was previously paused by the
PAUSE button.
7. Press the +1 CAM INC button to move a sequence
one step forward from the step that was previously
paused by the PAUSE button.
8. Press the –1CAM DEC button to move a sequence
one step backward from the step that was previous-
ly paused by the PAUSE button.
9. To return to the spot monitoring, select the desired
camera number by pressing the Numeric buttons,
then press the CAM (SET) button.

8. On Screen Display

1. Select the desired monitor.
Refer to the Monitor Selection on page 50.
2. Select 11 by pressing the Numeric buttons, then
press the FUNCTION button to toggle the display of
date and time on and off on the selected monitor.
1
4
7
MON
ESC
BACK
7.MAY.98 12:34:56
C32 M2 CU3
P64 T32
3. Select 22 by pressing the Numeric buttons, then
press the FUNCTION button to toggle the monitor
status display on and off on the selected monitor.
-55-
2 3
FUNCTION
5 6
8 9
0 CAM
SET
FWD
HISTORY
3RD FLOOR
ROOM 306