Major Operating Connections - Panasonic WJ-SX350 Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
<Front View>
ALARM
LOGIN
ALARM
ACK/RESET
ALL RESET
RECALL
OPERATE
BUSY PROHIBITED STATUS
1. Log-in indicator (LOGIN)
This indicator lights up when log-in is accom-
plished.
2. Alarm indicator (ALARM)
This indicator blinks to indicate an alarm condition
exists.
It changes to steady light when the alarm is reset
automatically.
To turn off the indicator, press the ACK/RESET or
ALL RESET button.
3. Alarm Acknowledgment and Reset button
(ACK/RESET)
This button is used to cancel the activated alarm.
You must select the alarmed monitor(s) first to can-
cel the alarm.
Press this button once to acknowledge the activat-
ed alarm (the indicator blinks rapidly), then press
this button once again for alarm reset.
4. All Alarms Reset button (ALL RESET)
This button is used to cancel plural alarms in a
lump.
Select the alarmed monitor first (Monitor 1 for Alarm
Mode 1, one of four monitors for Alarm Mode 2),
then press this button for alarm reset.
SEQUENCE
BACK FWD
1 2 3
SEQ PAUSE SEQ
4 5 6
1 CAM 1 CAM
7 8 9
DEC INC
MON 0 CAM
ESC SET
CAM
MENU SET UP
BACK FWD
HISTORY
CAMERA SITE CONTROL
ALT SHIFT IRIS
CLOSE
IRIS RESET
FUNCTION ON OFF FOCUS
AUTO PAN
NEAR
RANDM PAN
PRESET
POSI ZOOM
AUX 1
TELE
WIPER
CAM
POSI
AUX 2
DEF
5. Alarm Recall button (RECALL)
This button is used to recall the Alarm Logs
(Activated alarm records).
Select the desired monitor to display the alarm
records, then press this button to toggle the display
of alarm records On and Off on the selected moni-
tor.
6. Backward Sequence button (BACK SEQ)
This button, in combination with the Numeric but-
tons, is used to run a Tour or Group sequence in
reverse on the selected monitor.
It is also used to continue a sequence in reverse,
that was previously paused on that monitor by the
PAUSE button.
7. Sequence Pause button (PAUSE)
This button is used to pause a sequence that is
being run on the selected monitor.
8. Forward Sequence button (FWD SEQ)
This button, in combination with the Numeric but-
tons, is used to run a Tour or Group sequence in
forward on the selected monitor.
It is also it is used to continue a sequence forward,
that was previously paused on that monitor by
pressing the PAUSE button.
-16-
AUTO FOCUS
OPEN
UP
FAR
LEFT RIGHT
WIDE
DOWN
350
MATRIX SWITCHER WJ-SX