Limitation Of The Number Of The Target Projectors When Using Multiple Projectors; Setting The Projector Id - Epson EB-1925W User Manual

Limitation of the Number of the Target Projectors when Using Multiple Projectors

When an ID is set for the projector and the remote control, you can
use the remote control to operate only the projector with a matching
ID. This is very useful when managing multiple projectors.
You can set an ID for the projector within a range of "1" to "9". The
default value is Off.
You can set an ID for the remote control within a range of "0" to "9".
The default value is "0". The following table shows the possible
combinations of projector ID and remote control ID.
Opera-
Combinations
tion
Possible Projector ID: 1
Remote control ID: 1
Possible Projector ID: Off
Remote control ID: 1
Possible Projector ID: 1
Remote control ID: 0
Not possi- Projector ID: 1
ble

Setting the Projector ID

Descriptions
The projector ID and the
remote control ID are
identical, therefore you can
operate the projector with
the remote control.
When the Projector ID is
Off, you can operate with
the remote control
regardless of the remote
control ID setting.
When the remote control ID
is "0", you can operate with
the remote control
regardless of the Projector
ID setting.
The projector ID and the
remote control ID do not
match, therefore you cannot
Opera-
Combinations
tion
Remote control ID: 3
Procedure
A
Press the [Menu] button, and then select Extended -
Projector ID from the Configuration menu.
Configuration Menu" p.52
Using the Remote Control
42
Descriptions
operate the projector with
the remote control.
"Using the
s
Using the Control panel