Correcting The Focus; Adjusting The Volume; Selecting The Projection Quality (Selecting Color Mode) - Epson EB-925 User Manual

Adjusting Projected Images
A
Extend the rear foot.
B
Retract the rear foot.

Correcting the Focus

You can correct the focus using the focus ring.

Adjusting the Volume

You can adjust the volume using one of the following methods.
• Press the [Volume] button on the control panel or the remote control
to adjust the volume.
[ ] Decreases the volume.
a
[ ] Increases the volume.
b
Using the remote control
• Adjust the volume from the Configuration menu.
Settings - Volume p.80
s
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode
Dynamic Ideal for use in a bright room. This is the brightest
mode, and reproduces shadow tones well.
40
Using the control panel
Application