Changing The Aspect Mode (Eb-925/Eb-905/Eb-900/Eb-95 Only) - Epson EB-925 User Manual

Adjusting Projected Images
Projecting images from a computer
The following shows projection examples for each aspect mode.
Aspect Mode
XGA 1024X768(4:3)
Normal
16:9
Full
Zoom
Native
Input Signal
WXGA 1280X800(16:10)
a
If parts of the image are missing, set the Resolution setting to Wide
or Normal from the Configuration menu, according to the size of the
computer panel.
s Signal - Resolution

Changing the aspect mode (EB-925/EB-905/EB-900/EB-95 only)

Projecting images from video equipment
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order 4:3 and 16:9.
When inputting a 720p/1080i signal and the aspect mode is set to 4:3, a 4:3
zoom is applied (the right and left sides of the image are cut off).
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A
4:3
B
16:9
Projecting images from the HDMI port
Each time the Aspect button on the remote control is pressed, the aspect
mode changes in the order Auto, 4:3, and 16:9.
Example: 1080p signal input (resolution: 1920x1080, aspect ratio: 16:9)
p.78
43