Images Appear Dark; Problems When Projection Starts; The Projector Does Not Turn On - Epson EB-925 User Manual

Problem Solving

Images appear dark

Check
Is the image brightness set correctly?
g
Is the contrast adjusted correctly?
Is it time to replace the lamp?

Problems when Projection Starts

The projector does not turn on

Check
Did you press the [t] button?
Are the indicators switched off?
Do the indicators turn on and off when the power cable is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
Is the Control Panel Lock set to Full Lock?
Is the correct setting for the remote receiver selected?
Adjust the Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness p.77
s Settings - Power Consumption p.80
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.77
When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp" p.112
Press the [t] button to turn the power on.
The power cable is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cable.
s "From Installation to Projection" p.30
Check that your electrical outlet or power source is functioning correctly.
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Press the [t] button on the remote control. If you do not want to use Control Panel Lock, change the setting to Off.
s Settings - Control Panel Lock p.80
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.80
Remedy
Remedy
104