Control Panel - Epson EB-925 User Manual

Part Names and Functions

Control Panel

Name
A
[t] button Turns the projector power on or off.
s "From Installation to Projection"
B
Changes to the next input source that is sending an image.
[Source Search]
button
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)"
• When the Configuration menu or the Help screen is
C
[Enter] button
displayed, it accepts and enters the current selection and
moves to the next level.
• If pressed while projecting analog RGB signals from the
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Display
Position.
Function
p.30
p.31
Name
• Performs vertical keystone correction.
D
[w][v] buttons
s "Correcting keystone distortion in vertical
directions"
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu"
s "Using the Help"
E
[a] Decreases the volume.
[a][b] button
[b] Increases the volume.
s "Adjusting the Volume"
F
Displays and closes the Help screen which shows you how
[Help] button
to deal with problems if they occur.
s "Using the Help"
• Stops the current function.
G
[Esc] button
• If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s "Using the Configuration Menu"
• Performs horizontal keystone correction.
H
[<][>] buttons
s "Correcting keystone distortion in horizontal
directions"
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu"
s "Using the Help"
I
Displays and closes the Configuration menu.
[Menu] button
s "Using the Configuration Menu"
Function
p.36
p.74
p.94
p.40
p.94
p.74
p.37
p.74
p.94
p.74
13