Table of Contents
Advertisement
KX-TCD725EM-3(38~64)
01.7.19 10:42 PM
Ringer Option
In "Ringer Option" menu, Selecting the ringer type for paging (p. 18), To select the ringer
type for private category (p. 25), and Selecting the ringer type for time alarm (p. 42) are also
available.
Selecting the Handset Ringer Volume/Type
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
To select the handset ringer
volume
7 levels are available. The lowest level is 1. The
highest level is 6. The factory preset is 3. When
set to OFF, the handset will not ring.
1
Press
.
2
Press
or
until the arrow points
to "Setting Handset", then press
.
3
Press
or
until the arrow points
to "Ringer Option", then press
4
Press
or
until the arrow points
to "Ringer Volume", then press
The current setting is displayed and rings.
5
Press
or
to select the desired level.
Each time you press
selected volume is displayed and rings.
Ex.
Level 6 is selected.
R i n g e r V o l u m e
1 2 3 4 5 6
LOW
To set to OFF, erase " " by pressing
until "OFF" is displayed.
6
Press
.
A beep sounds.
The display will return to "Ringer
Volume". To return to the standby mode,
press
or wait for 60 seconds.
When set to OFF, "Ringer Off" will be
displayed.
Page 43
To select the handset ringer
type for external/internal call
You can select one of 20 ringer types for each
external and internal call. The factory preset is
type 1.
1
Follow steps 1 to 3 of To select the
handset ringer volume.
2
Press
Type" for external call.
OR
Press
Type" for internal call.
.
3
Press
The current setting is at the arrow and
.
rings.
Ex. "Ext Ring Type" is selected.
or
, the
4
Press
type.
HIGH
Each time you press a button, the selected
ringer type sounds.
5
Press
A beep sounds.
The display will return to step 2. To return
to the standby mode, press
You can exit the programming mode any time
by pressing
or
to select "Ext Ring
or
to select "Int Ring
.
E x t R i n g T y p e
H R i n g e r 1
R i n g e r 2
or
to select the desired
.
.
or wait
43
Advertisement
Table of Contents
