Midas VENICE Operator's Manual page 20

The talkback LEVEL control gi-
ves continuous adjustment of the
talkback signal from +50dB to
off. The talkback input accepts a
maximum input level of +8dBu.
The PHONES level control gi-
ves continuous adjustment of the
level from +10dB to off at the
phones output a&b.
The SPEAKERS level control
gives continuous adjustment of
the signal at the speakers left and
right output from +10dB to off
with 0dB at the centre position of
the rotary control.
The SOLO control adjusts the
incom ing solo level before sen-
ding it to the headphones and
speaker outputs. The control
range is -20dB to +20dB with
0dB in centre position.
20
The non-latching M O N switch
connects the talkback mic to
mon1 and mon2 busses.
The non-latching AUX switch
connects the talkback m ic to
aux1 and aux2 pre-busses.
The non-latching GRP
connects the talkback m ic to all
group busses.
The non-latching M A S switch
connects the talkback m ic to left
and right master busses.
The SOURCE switch controls
whether the tape in or master si-
gnal is present at the headphones
and control room speaker out-
puts, if no solo button is engaged.
If a solo button is engaged the
PFL / AFL switch controls whe-
ther the mono pre fader listen or
the stereo after fader listen signal
is present at the headphones and
control room speaker outputs.
switch