Panasonic NV-FJ732EE Operating Instructions Manual page 8

If you are connecting your VCR to a TV using only RF
coaxial cable, then follow the steps. (RF Connection)
RF Coaxial cable must be connected to watch TV channels
• When [Poccия] (Russia) is selected in the Country setting
menu, the names of TV stations may not be correctly
displayed and the Auto Clock Setting does not work.
1 Aerial Input socket
2 Aerial Output socket
3 Aerial (not supplied)
4 Aerial lead (not supplied)
1) Press the [VCR-ON/OFF] (1) to
turn on the VCR and tune your
TV until the Country setting menu
appears on the TV screen.
2) Press the [Cursor] (38) 3421.
Select the country where you are
using the VCR.
3) Press the [OK] (24).
The VCR's Auto Setup automatically starts and tunes all
available TV stations and also sets the clock. This takes
about 5 minutes.
(For NV-FJ732EE and NV-FJ632EE)
When the indication appears on
the VCR display, the Auto Setup
is complete.
(For NV-FJ628EE)
When the clock setting menu appears after Auto Setup
has finished
• Press the [Cursor] (38) 3421 to set the correct time
and date.
• Press the [OK] (24) to conclude the setting.
8
5 TV (not supplied)
6 Aerial Input socket
7 RF Coaxial cable (supplied)
Panasonic VCR
Country
Deutschland Polska
Česká Rep. Россия
Magyarország others
If, after setup, the picture on the video playback channel
is distorted, change the RF output channel on the VCR
to another number.
1) Press the [MENU] (7) for more than 5 seconds.
The RF output channel number
appears on the VCR display.
The initial setting is channel 38.
2) Press the [Numeric] (2) or [Channel] (33).
Change the RF output channel.
Enter a channel number which differs by 2 or 3 from the
one initially set number. For example, as the original
number is 38, enter 41.
Retune your TV to the VCR's new RF output channel.
3) Press the [OK] (24) to conclude the setting.
To cancel the Auto Setup before it has finished
Press the [EXIT] (27).
When the clock setting menu appears after Auto Setup
has finished
1) Press the [Cursor] (38) 3421 to set the correct time
and date.
2) Press the [OK] (24) to conclude the setting.
To confirm that the TV stations have been tuned
correctly by the Auto Setup function
See page 17.
When no station has been set, confirm all connections
of the VCR again and restart the Auto Setup
See page 18.
When the station names and/or channel numbers have
not been set correctly
See page 17.