Panasonic NV-FJ732EE Operating Instructions Manual page 18

Decoder: To preset pay TV stations.
(For NV-FJ732EE and NV-FJ632EE)
• Press the [Cursor] (38) 34 to select [ON].
If [Decoder] is set to [OFF], normal TV stations are preset.
Video system: To change the type of video system.
• Press the [Cursor] (38) 34 to select [AUTO].
The VCR automatically distinguished between PAL,
SECAM/MESECAM signals. If the picture lacks colour,
press the [Cursor] (38) 34 to change the type of video
system [PAL] or [MESECAM].
PAL: For receiving PAL signals.
MESECAM:For receiving SECAM signals.
Mono: To select the type of sound to be recorded.
• Press the [Cursor] (38) 34 to select [OFF].
• Select [ON] if you want to record the normal (mono) sound
on the Hi-Fi audio tracks during a stereo, bilingual or
NICAM broadcast, or if the stereo sound is distorted due to
inferior reception conditions.
Audio mode: To change the Audio system.
• Press the [Cursor] (38) 34 to select the desired Audio
mode.
BG: PAL B.G.H/SECAM B.G
DK: PAL D/SECAM D.K.K1
I: PAL I
9) Press the [OK] (24) to conclude the setting.
10) Press the [EXIT] (27) to exit the On Screen Display.
To Delete, Add or Move a Programme
Position
1) Press the [MENU] (7) to display the Main menu on the
TV screen.
2) Press the [Cursor] (38) 34 to select [Tuning]. Press the
[OK] (24) to display the Tuning menu on the TV screen.
3) Press the [Cursor] (38) 34 to
select [Manual].
Press the [OK] (24) to display the
list of tuned TV stations.
4) Press the [Cursor] (38) 34 to
select the desired TV station.
5) Follow the operations below.
To delete a programme position [Delete]:
Press the [CH] (12) (J, red for NV-FJ732EE and
NV-FJ632EE, [A] for NV-FJ628EE).
To insert a blank programme position [Add]:
Press the [DATE] (11) (r, green for NV-FJ732EE
and NV-FJ632EE, [B] for NV-FJ628EE).
To move a TV station to another programme position
[Move]:
Press the [ON] (10) (r, yellow for NV-FJ732EE and
NV-FJ632EE, [C] for NV-FJ628EE), and then use the
[Cursor] (38) 34 to select the new programme
position to which you want to assign the TV station.
6) Press the [OK] (24) to conclude the setting.
7) Press the [EXIT] (27) to exit the On Screen Display.
18
Note:
• If downloading of the setup data has been performed, only the
Hint:
• If you have performed Manual Tuning to enter TV stations, the
To Restart the Auto Setup, Restart the
Download or Return the VCR to the
Shipping Condition
1) Press the [MENU] (7) to display the Main menu on the
2) Press the [Cursor] (38) 34 to select [Tuning]. Press the
3) Press the [Cursor] (38) 34 to
4) Press the [OK] (24) to prepare
5) Press the [OK] (24) again to actually start the Auto
Panasonic VCR
Tuning
Pos Name Ch
1 ARD 1
2 ZDF 2
3 N3 19
4 HR3 26
5 BR3 18
6 RB3 3
7 SFB3 36
8 SW3 29
Delete Add Move
instruction indication [Delete] appears.
(For NV-FJ732EE and NV-FJ632EE)
[ss] indication may appear under [Pos/Name] on the On Screen
Display when programming a S
(For NV-FJ732EE and NV-FJ632EE)
TV screen.
[OK] (24) to display the Tuning menu on the TV screen.
select [Auto-Setup Restart],
[Download]
(For NV-FJ732EE and
NV-FJ632EE) or
[Shipping condition].
for Auto Setup start, Download start or resetting the VCR
to the shipping condition.
Setup, start the Download or change the settings back to
the shipping condition.
• After returning the VCR to the shipping condition,
disconnect and reconnect the AC Mains Cable to
re-tune the VCR.
V timer recording.
HOW IEW
Panasonic VCR
Tuning
Manual
Auto-Setup Restart
Download
Shipping condition