Ac Mains Lead Connection - Panasonic SC-ZT2 Operating Instructions Manual

AC mains lead connection

FOR THE UNITED KINGDOM, REPUBLIC OF IRELAND, SAUDI ARABIA, KUWAIT, MALAYSIA AND
HONG KONG ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
To save power when the system is not to be used for a long time, unplug it from the household mains socket.
Make sure to turn this system off before unplugging the AC mains lead.
If you unplug the AC mains lead without turning this system off, some of the settings may not be saved.
Power supply differ depending on the symbols (E, GN, GS) indicated on the packaging box.
Main unit
Connect AC mains lead after all other cables are connected.
This system consumes approx. 0.5 W when AC mains lead is connected to the household mains socket (approx.
0.2 W in standby condition (HDMI off mode) (➜ page 24)).
Household mains socket
For E, GN
(AC 220 to 240 V, 50 Hz)
For GS
(AC 110 to 240 V, 50/60 Hz)
Speakers
For power consumption of speaker in standby, see page 16.
Household mains socket
For E, GN
(AC 220 to 240 V, 50 Hz)
For GS
(AC 110 to 240 V, 50/60 Hz)
Note
The supplied AC mains leads are for use with this system only. Do not use them with other equipment. Also, do not use AC mains
lead for other equipment with this system.
14
VQT2R71
AC mains lead (supplied)
AC mains lead
(supplied)
AC IN
Side view