Table of Contents
Advertisement
5
If necessary, change the following settings
according to the type of document.
L To select the resolution, see page 31.
L To select the contrast, see page 32.
6
Dial the fax number.
L To send a single page, skip to step 10.
L To send multiple pages, go to the next
step.
7
Press {QUICK SCAN} to scan the document
into memory.
Example:
8
Place the next page on the scanner glass.
9
Press {SET}.
L To send more pages, repeat steps 8 and
9.
10
Press {START}.
To stop sending
Press {STOP}.
4.3 Document
requirements
4.3.1 Using the auto document
feeder
Minimum document size
128 mm
Maximum document size
216 mm
PAGES=01
01%
STANDARD
u
SCAN:PRESS SET
SEND:PRESS START
Effective scanning area
L Shaded area will be scanned.
4 mm
208 mm
216 mm
Document weight
L Single sheet:
2
2
45 g/m
to 90 g/m
L Multiple sheets:
2
2
60 g/m
to 80 g/m
4.3.2 Using the scanner glass
Effective scanning area
L Shaded area will be scanned.
287 mm
5 mm
4.3.3 Note for the auto document
feeder and the scanner glass
L Check that ink, paste or correction fluid has
dried completely.
L To set a document with a width of less than
210 mm when using the auto document
feeder, we recommend using the scanner
glass to copy the original document onto A4
or letter-sized paper, then setting the copied
document.
L Do not set documents that do not satisfy the
requirements of size and weight when using
the auto document feeder. Make a copy of
the document using the scanner glass and
set the copy.
L Remove clips, staples or other fasteners
when using the auto document feeder.
L When using the auto document feeder, the
total height of the documents when laid flat,
4. Fax
5 mm
5 mm
4 mm
4 mm
208 mm
4 mm
5 mm
33
Advertisement
Table of Contents
