Sending A Fax Using One-Touch Dial Feature And Navigator Directory - Panasonic KX-FLB803FX Operating Instructions Manual

4. Fax
must be less than 10 mm. If the documents
exceed the capacity of the auto document
feeder, they may fall or cause a jam in the
feeder.
L Do not set the following types of documents
when using the auto document feeder: (Make
a copy of the document using the scanner
glass and set the copy instead.)
– Chemically treated paper such as carbon
or carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with printing on the opposite side
that can be seen through the other side,
such as newsprint
34
4.4 Sending a fax using
one-touch dial feature and
navigator directory
Before using this feature, store the desired
names and telephone numbers into one-touch
dial feature and navigator directory (page 29).
L Keep the front cover page open for button
locations.
L Make sure that the {FAX} light is ON.
1
Adjust the width of the document guides to fit
the actual size of the document.
2
Insert the document (up to 40 pages) FACE
UP into the feeder until a single beep is
heard.
L Confirm that there are no documents
on the scanner glass.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3
If necessary, change to the desired
resolution (page 31) and the desired contrast
(page 32).
4
Enter the fax number.
Using stations 1–7:
Press the desired station key.
Using stations 8–14:
Press {LOWER}, then press the desired
station key.
Using navigator directory:
Press {DIRECTORY}, then press {V} or {^}
repeatedly to display the desired item.
5
Press {START}.
Note:
L Do not open the document cover when
sending a fax with the auto document feeder.
To send a fax using the scanner glass
L Confirm that there are no documents in
the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then
close the document cover.
3. Enter the fax number using one-touch dial or
navigator directory.
L To send a single page, skip to step 7.
L To send multiple pages, go to the next
step.