Specifications - Panasonic KX-FLB803FX Operating Instructions Manual

Flat-bed multi-function laser fax with separator and flat-bed multi-function laser fax
Table of Contents

Advertisement

11.2 Specifications

■ Applicable lines:
Public Switched Telephone Network
■ Document size:
Max. 216 mm in width, Max. 600 mm in length
■ Effective scanning width:
208 mm
■ Effective printing width:
A4: 202 mm
Letter/Legal: 208 mm
■ Transmission time
*1
Approx. 4 s/page (ECM-MMR Memory
*2
transmission)
■ Scanning density:
Fax resolution:
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm-in standard resolution,
7.7 lines/mm-in fine/photo resolution,
15.4 lines/mm-in super fine resolution
Copy resolution:
Up to 600 × 600 dpi
Scanning resolution:
Up to 600 × 1,200 dpi (Optical)
Up to 9,600 × 9,600 dpi (Interpolated)
■ Photo resolution:
64-level
■ Scanner type:
Colour Contact Image Sensor
■ Printer type:
Laser Printer
■ Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
■ Modem speed:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 /
21,600 / 19,200 / 16,800 / 14,400 / 12,000 /
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic
Fallback
■ Operating environment:
10 °C – 32.5 °C, 20 % – 80 % RH (Relative
Humidity)
■ Dimensions:
Approx. height 318 mm × width 440 mm × depth
445 mm
■ Mass (Weight):
Approx. 16 kg
■ Power consumption:
Standby: Approx. 9.5 W
Preheat: Approx. 70 W
Copy: Approx. 430 W
:
11. General Information
Maximum: Approx. 900 W (When the fuser lamp
turns on)
■ Power supply:
220–240 V AC, 50/60 Hz
■ Memory capacity
(for operation and storing memory):
32 MB
■ Fax memory capacity:
2 MB in total
Approx. 170 pages of memory reception
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard
resolution.)
■ Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
■ Print speed:
Approx. 18 ppm (pages per minute)
■ Printing resolution:
600 × 600 dpi
*1 Transmission speed depends upon the
contents of the pages, resolution, telephone
line conditions and capability of the other
party's machine.
*2 Transmission speed is based upon the ITU-T
No. 1 Test Chart. If the capability of the other
party's machine is inferior to your unit, the
transmission time may be longer.
ITU-T No.1 Test Chart
Note:
L Design and specifications are subject to
change without notice.
L The pictures and illustrations in these
instructions may vary slightly from the actual
product.
93

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-flb813fx

Table of Contents