Panasonic KX-T7625CE Quick Reference Manual page 12

Location of Controls
PAUSE:
Used to insert a pause when
PAUSE
storing a telephone number. This
button also functions as the
PROGRAM button when there is
no PROGRAM button on your
telephone.
FWD/DND (Call Forwarding/Do
Not Disturb):
FWD/DND
Used to perform Call Forwarding
or Do Not Disturb.
CONF (Conference):
CONF
Used to establish a multiple-party
conversation.
INTERCOM:
Used to make or receive intercom
INTERCOM
calls.
AUTO ANS (Auto Answer)/
MUTE:
AUTO ANS
Used to receive an incoming call in
MUTE hands-free mode or mute the
microphone/handset during a
conversation.
AUTO DIAL/STORE:
Used for System/Personal Speed
AUTO DIAL
Dialling or storing program
STORE
changes.
TRANSFER:
TRANSFER
Used to transfer a call to another party.
REDIAL:
REDIAL
Used to redial the last dialled
number.
MESSAGE:
Used to leave a message waiting
MESSAGE
indication or call back the party
who left the message waiting
indication.
12
FLASH/RECALL:
Used to disconnect the current call
FLASH/
RECALL
and make another call without
hanging up.
HOLD:
HOLD
Used to place a call on hold.
SP-PHONE (Speakerphone):
SP - PHONE
Used for the hands-free operation.
Navigator Key (KX-T7630/7633/
7636):
Used to adjust the volume and the
ENTER
display contrast or select desired
items.
Volume Key (KX-T7625):
VOLUME
Used to adjust the volume.
CANCEL (KX-T7630/7633/7636):
CANCEL
Used to cancel the selected item.
PROGRAM (KX-T7625):
PROGRAM
Used to enter and exit the
personal programming mode.
ENTER (KX-T7630/7633/7636):
ENTER
Used to confirm the selected item.
CO:
Used to make or receive an
outside call. Pressing this button
(CO)
seizes an idle outside line
automatically. (Button assignment
is required.)
Also used as feature buttons.
(Button assignment is required.)
Message/Ringer Lamp:
When you receive a call, the lamp
flashes green. When someone
has left you a message, the lamp
stays on red.
Soft Buttons (KX-T7630/7633/
7636):
Used to select the item displayed
on the bottom line on the display.