Tilt Angle Adjustment
Pull down the handset hook until it locks to prevent the
handset from slipping down from the operation board when at
Fold up the operation board to
Mount the unit on the wall.
*The illustrations used in this page are a KX-T7636.
The tilt angle of the operation board can be
adjusted to four step-angles.
To lift: Lift up the operation board to the desired
To set down: Lift up the operation board to the
highest angle and then press down to
step-angle 1. Please do not get your
fingers caught between the base and
the operation board.
Connect the telephone line cord, and
wall mounting adaptor.
Pull down the handset hook until it locks,
so the tab holds the handset.
To temporarily place the handset down
during a conversation, hook it over the
top edge of the phone as shown.
first and then