Table of Contents
Advertisement
3. BORDER
This item lets you select the colour of the border that splits
the camera pictures in a Multiscreen display.
1. Move the cursor to the BORDER parameter.
2. Select the desired mode or colour by pressing the + or
– button.
The initial factory setting for the border colour is WHITE.
WHITE: White Border
GREY:
Grey Border
BLACK: Black Border
OFF:
No Border
4. QUAD SHIFT
This item lets you enable or disable the quad shift operation
when the MULTISCREEN SELECT button is pressed on
the front panel. Quad shift displays a picture series such as
1-2-3-4 or 5-6-7-8 on quad screens.
1. Move the cursor to the QUAD SHIFT parameter.
2. Select ON or OFF by pressing the + or – button.
The initial factory setting is OFF.
ON: Enables the quad shift operation.
OFF: Disables the quad shift operation.
14
Record Output Setup Menu
WJ-FS116 SETUP
ALARM SETUP
MONITOR OUTPUT SETUP
REC OUTPUT SETUP
SEQUENCE SETUP
SYSTEM SETUP
Move the cursor to REC OUTPUT SETUP on the SETUP
menu, then press the SET button. The REC OUTPUT
SETUP menu appears on the monitor screen as shown
below.
REC OUTPUT SETUP
TITLE DISPLAY
REC MODE
1. TITLE DISPLAY
This item lets you enable or disable recording of the cam-
era title with the picture.
1. Move the cursor to the TITLE DISPLAY parameter.
2. Select either ON or OFF.
The initial factory setting is ON.
ON: Enables recording of the camera title with the pic-
ture on the tape.
OFF: Disables recording of the camera title with the
picture on the tape.
ON
004
Advertisement
Table of Contents
