Table of Contents
Advertisement
9. MONITOR MODE
This item lets you select whether to switch the monitor
screen automatically to the camera picture of the channel
whose alarm is activated.
1. Move the cursor to the MONITOR MODE parameter.
2. Select OFF or SPOT by pressing the + or – button.
The initial factory setting is SPOT.
OFF: Ignores alarm activation and continues to display
the pictures in the mode selected previously.
SPOT: The camera picture whose alarm is activated is
displayed and retained until the alarm is reset.
13
Monitor Output Setup Menu
WJ-FS116 SETUP
ALARM SETUP *
MONITOR OUTPUT SETUP
REC OUTPUT SETUP
SEQUENCE SETUP
SYSTEM SETUP
Move the cursor to MONITOR OUTPUT SETUP on the
SETUP menu, then press the SET button. The MONI-
TOR OUTPUT SETUP menu appears on the monitor
screen as shown below.
MONITOR OUTPUT SETUP
TITLE DISPLAY
STILL DISPLAY
BORDER
QUAD SHIFT
1. TITLE DISPLAY
This item lets you enable or disable the camera title display
overlaid on the camera picture.
1. Move the cursor to the TITLE DISPLAY parameter.
2. Select ON or OFF by pressing the + or – button.
The initial factory setting is ON.
ON: Enables display of the camera title on the monitor
screen.
OFF: Disables display of the camera title on the moni-
tor screen.
2. STILL DISPLAY
This item lets you enable or disable the subtitle "STILL"
overlaid on the playback picture.
1. Move the cursor to the STILL DISPLAY parameter.
2. Select ON or OFF by pressing the + or – button.
The initial factory setting is ON.
ON: Enables display of the subtitle "STILL" on the mon-
itor screen.
OFF: Disables display of the subtitle "STILL" on the
monitor screen.
ON
ON
WHITE
OFF
Advertisement
Table of Contents
