System Setup Menu - Panasonic WJ-FS109 Operating Instructions Manual

<WJ-FS116>
STEP CH
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
<WJ-FS109>
STEP CH
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
Step Assignment
1. Move the cursor to the step number you want to edit in
the CH area by pressing the cursor (C, D, A, B) but-
tons.
2. Select the desired camera channel in the CH area by
pressing the Increment (+) or Decrement (–) button.
1 - 16: Camera Channel
Note: 10-16 are not available for WJ-FS109.
– –: Not Assigned
3. Repeat the above procedures to assign other steps.
Dwell Time
1. Move the cursor to the SEC (Second) area by pressing
the cursor (C, D, A, B) buttons.
2. Select the desired dwell time in the SEC area by press-
ing the Increment (+) or Decrement (–) button.
Dwell Time can be selected between 0S and 30S.
Note: A step assigned a dwell time of 0S is skipped.
16
SPOT SEQ SETUP
SEC STEP CH SEC
2S 9 9 2S
2S 10 10 2S
2S 11 11 2S
2S 12 12 2S
2S 13 13 2S
2S 14 14 2S
2S 15 15 2S
2S 16 16 2S
SPOT SEQ SETUP
SEC STEP CH SEC
2S 9 9 2S
2S 10 -- 0S
2S 11 -- 0S
2S 12 -- 0S
2S 13 -- 0S
2S 14 -- 0S
2S 15 -- 0S
2S 16 -- 0S

System Setup Menu

WJ-FS116 SETUP
ALARM SETUP
MONITOR OUTPUT SETUP
REC OUTPUT SETUP
SEQUENCE SETUP
SYSTEM SETUP
Move the cursor to SYSTEM SETUP on the SETUP menu,
then press the SET button. The SYSTEM SETUP 1/2 menu
appears on the monitor screen as shown below.
SYSTEM SETUP
TITLE SETUP
TITLE POSI
CAM SW LOSS
PLAYBACK AUTO
PASSWORD
PWR ON MODE
VTR KEY LOCK
To go to SYSTEM SETUP 2/2, press the C button.
SYSTEM SETUP
ENCODE
SYSTEM SETUP
ENCODE
SW INTERVAL
NO. OF CAMS
To go back to SYSTEM SETUP 1/2, press the D button.
1. TITLE SETUP
This item lets you edit the camera title to be displayed on
the monitor screen.
Up to 8 alphanumeric characters can be displayed on the
monitor.
1. Move the cursor to TITLE SETUP parameter, then press
the SET button.
The TITLE SETUP menu appears on the monitor screen
as shown on next page.
1/2
ON
ON
OFF
1
OFF
2/2
PANA
2/2
OTHERS
1
16