Table of Contents
Advertisement
Sending a fax using the EASY DIAL
Before using this feature, programme the desired names and telephone numbers into the directory (p. 37).
1
Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
3
Insert the document (up to 15 pages) FACE DOWN
until the unit grabs the document and a single beep
is heard.
Display:
If necessary, press (RESOLUTION) repeatedly to
4
select the desired setting (p. 41).
Rotate (EASY\DIAL) until the desired name is
5
displayed.
Example:
≥To confirm the number, press (NAME/TEL\NO.).
Press (START/SET/COPY).
6
≥The unit will start transmission.
Helpful hints:
≥You can confirm the stored items on the display (p. 39)
or on the telephone number list (p. 119).
≥The connecting tone will be heard during dialling to tell
you the status of the other party's machine (p. 53).
Note:
≥While scanning, do not move the pages which have
already been ejected. A paper jam may occur. Allow
the scanning process to finish before viewing
documents.
≥If the desired name has not been stored, press (STOP)
and dial the number manually.
≥For further details about using the EASY DIAL, see
page 39.
STANDARD
Alice
FAX=<Alice>
CONNECTING.....
Sending Faxes
directory!
Document
feeder tray
(STOP)
(EASY\DIAL)
(MONITOR)
(RESOLUTION)
(START/SET/COPY)
If your unit cannot send a fax
Verify that the number dialled is answered by
the other party's machine.
1. Rotate (EASY\DIAL) until the desired name
is displayed.
2. Press (MONITOR).
Document guides
(NAME/TEL\NO.)
43
Advertisement
Table of Contents
