Table of Contents
Advertisement
Open the protection bag by cutting the end of the
8
bag and remove the drum unit.
Remove the protection cap.
9
10
Remove the protection sheet.
Caution:
≥Do not touch or scratch the green drum surface
as this may damage the drum unit.
≥Do not expose the drum unit to light for more
than 5 minutes as this may damage the drum
unit.
11
Install the new drum unit on the toner cartridge,
holding the two tabs and matching the triangles.
12
Close the top cover securely by pushing down on
the dotted area at both ends.
Replacement
Protection bag
Protection cap
Green drum
surface
Tabs
Toner cartridge
Drum unit
Protection
sheet
Drum unit
Triangles
Dotted area
115
Advertisement
Table of Contents
