Folding Copies At The Center/Binding Copies At The Center: Half Fold/ Fold & Staple; Function Overview - Konica Minolta BIZHUB 500 User Manual

Finishing/Folding
7.5 Folding Copies at the Center/Binding Copies at the
Center: Half Fold/ Fold & Staple
The Half Fold and Fold & Staple modes are
available on the machine mounted with
Finisher FS-510 and Saddle Stitcher SD-
502 as illustrated on the right, along with
Booklet function which will be
automatically selected in combination.
- In the Half Fold mode, each copied
sheet is creased and output to the Saddle stitcher tray.
- In the Fold & Staple mode, each copied set is creased and stapled at two
positions (saddle stitched), then output to the Saddle stitcher tray.
Note
Finisher FS-510 is initially equipped with two exit trays, and one optional
exit tray (OT-601) can be installed. Contact your service representative, if
desired. (Already installed in the above illustration.)

Function overview

Key
bizhub 500/420
Description
7
7-25