4
4.2
Specifying a recipient
!
Detail
Destinations can easily be specified if they have
been registered in Utility mode. For details on
registering destinations, refer to the User manual
[Facsimile Operations].
To send or receive faxes manually, touch [Off-Hook].
When this button is touched, the dial tone can be
heard from the speaker. For details, refer to the User
manual [Facsimile Operations].
The following procedure describes how to specify the
recipient where the fax is to be sent.
To use a program
If a destination has been registered with a program, the
fax number can be dialed simply by pressing the
program button.
If a destination has not been registered with a program,
the destination cannot be specified.
If transmission settings have been registered with the
program, the functions are automatically set.
Only one program can be selected.
4-6
Using fax functions
bizhub 750/600 (Phase 2)