Konica Minolta BIZHUB 750 Function Manual page 64

2
Paper of the same size and type is positioned with the
w orientation in one paper tray and with the v
orientation in another tray.
The "Auto Paper Select" setting is selected.
The "Mixed Original" function must not be used.
*2
If the "Corner Staple" or "2 Staples" setting is
selected, the "Sort" setting is automatically selected.
The "Corner Staple" or "2 Staples" setting and the
"Offset" setting cannot be used together.
*3
The Staple settings are available only if optional
finisher FS-602 or finisher FS-504/FS-505 is installed.
*4
The Punch settings are available only if punch kit PK-
504/PK-505 is installed on finisher FS-504/FS-505/FS-
602.
*5
The number of punched holes differ depending on
the country (region) where the unit is installed. For
details, consult your technical representative.
The following procedure describes how to select
Finishing settings.
2-28
Using copy functions
bizhub 750/600 (Phase 2)