Setting The Date And Time - Panasonic KX-TCD230FX Operating Instructions Manual

TCD230-240FX(e).book Page 14 Wednesday, June 8, 2005 7:15 PM
Preparation
L If you changed the PIN, enter it (page
35).
4
Select "Call Options", then press
{>}.
5
Select "Dial Mode", then press {>}.
6
Select the desired setting, then press
{>}.
7
Press {ih}.

Setting the date and time

Important:
L Confirm that the AC adaptor is connected.
L Ensure that w is not flashing.
1
Press {j/OK}.
2
Select "Handset Setup", then press
{>}.
3
Select "Time Settings", then press
{>}.
4
Select "Set Date & Time", then press
{>}.
5
Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2005
Press {1}{7} {0}{5} {0}{5}.
6
Enter the current hour and minute by
selecting 2 digits for each.
L You can select "AM", "PM" or 24-hour
time entry by pressing {*} repeatedly.
Example: 3:30 PM
Press {0}{3} {3}{0}, then press {*}
repeatedly until "03:30 PM" is
displayed.
7
Press {j/OK}.
8
Press {ih}.
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
14
L The date and time may be incorrect after a
power failure. In this case, set the date
and time again.