AUSTIN n°3 27/04/06 15:40 Page 11 Thank you for showing confidence in our product range. Please read these instructions carefully. SAFETY SYSTEM This appliance is fitted with two safety mechanisms. To start the juice machine, the pulp collector (I) must be correctly in position and the cover (E) must be properly secured by the clamp (J).
AUSTIN n°3 27/04/06 15:40 Page 12 DESCRIPTION OF THE APPLIANCE Large pusher Pulp collector Small pusher Clamp Reducer for small pusher Switch Feed tube Drive shaft Cover Motor unit Sieve Cord-tidy Juice collector Brush Pouring spout BEFORE USE We recommend that you wash the removable parts (parts A, B, C, E, F, G & I) after unpacking the applian- ce (see chapter CLEANING AND CARE Unpack the appliance and then place it on a solid , stable work surface, slip back the clamp (J), remove the...
Page 5
AUSTIN n°3 27/04/06 15:40 Page 13 Click the clamp (J) into place over the cover (E). Position a glass or other receptacle under the pouring spout (H) in front of the appliance. Plug in the appliance: You can use the cord-tidy (N) to adjust the length of the cord.
AUSTIN n°3 27/04/06 15:40 Page 14 USEFUL ADVICE - Wash the fruit carefully before stoning. - You do not need to remove the skin or peel. You only need to peel fruit with thick (and bitter) skin: citrus fruit, pineapple (remove the centre stalk). - Certain types of apples, pears, tomatoes etc.
Page 7
0845 602 1454 - UK (01) 461 0390 - Ireland or consult our website - www.moulinex.co.uk ELECTRICAL AND ELECTRONIC PRODUCTS AT END OF LIFE Environment protection first ! Your appliance contains valuable materials which can be recovered or recycled.
Need help?
Do you have a question about the Juice Machine Pro and is the answer not in the manual?
Questions and answers