Auto Disconnection (Kx-Fp300 Only) - Panasonic KX-FP300E Operating Instructions Manual

Auto disconnection
This feature allows you to answer a call with the extension telephone during the silent fax recognition rings in
the TEL/FAX mode (p. 79). If you lift the handset of the extension telephone and enter
code) while the ring back tone is heard, the unit will be disconnected and you can talk with the other party.
Important:
This code should be different from the remote activation ID (p. 73) and the fax activation code (p. 83).
1 Press MENU .
Display:
2 Press , then 4 9
3 Press
START/SET/COPY
4
Press or to select "ON".
If this feature is not required, select "OFF".
5
Press START/SET/COPY
The display will show the pre-selected code.
6
Enter the new code.
This code can be from 2 to 4 digits in length
using 0 – 9, and
7
Press START/SET/COPY
8
Press MENU .
(KX-FP300 only)
1.SYSTEM SET UP
.
AUTO DISCONNECT
.
MODE=ON
.
CODE= 0
.
.
SETUP ITEM [
Receiving Faxes
/
]
0 (pre-selected
MENU
START/SET/COPY
87