Important Safety Instructions - Panasonic KX-FP300E Operating Instructions Manual

Important safety instructions

When using this unit, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock or personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
this unit.
3. Unplug this unit from the main unit outlets
before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit near water, for example:
near a bath tub, wash bowl, kitchen sink or the
like.
5. Place the unit securely on a stable surface.
Serious damage and/or injury may result if the
unit falls.
6. Do not cover slots and openings on the unit.
They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.
7. Use only the power source marked on the unit.
If you are not sure of the type of power
supplied to your home, consult your dealer or
local power company.
8. This product is supplied with a moulded plug.
This plug has three conductors. If the type of
moulded plug does not fit your socket contact
an electrician to replace your socket. Do not
modify the connection this may make the
product unsafe.
9. Do not place objects on the power cord. Install
the unit where no one can step or trip on the
cord.
10. Do not overload mains outlets and extension
cords. This can result in the risk of fire or
electric shock.
11. Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.
12. To reduce the risk of electric shock, do not
disassemble this product, but take it to a
qualified engineer when maintenance or repair
work is required. Opening or removing covers
may expose you to dangerous voltages or
other risks. Incorrect re-assembly could cause
electric shock when the unit is subsequently
used.
13. Unplug this unit from the mains outlet and
refer servicing to qualified service personnel
when the following conditions occur:
A. When the power supply cord or plug is
damaged or frayed.
B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or
water.
D. If the unit does not work normally by
following the operating instructions. Adjust
only controls covered by the operating
instructions. Improper adjustment may
require extensive work by a qualified
technician.
E. If the unit has been dropped or physically
damaged.
F. If the unit exhibits a distinct change in
performance.
14. During thunderstorms, avoid using telephones,
except cordless types. There may be a remote
risk of an electric shock from lightning.
15. Do not use this unit to report a gas leak when
in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
INSTALLATION
1. Never install telephone wiring during a lightning
storm.
2. Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.
3. Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
4. Use caution when installing or modifying
telephone lines.
WARNING
To prevent the risk of fire or electrical shock, do
not expose this product to rain or any type of
moisture.
OTHER INFORMATION
Keep the unit away from electrical noise
generating devices, such as fluorescent lamps
and motors.
The unit should be kept free from dust, high
temperature and vibration.
The unit should not be exposed to direct sunlight.
Do not place heavy objects on top of this unit.
3