Overseas mode
You may experience difficulty when transmitting documents overseas. This feature makes sending documents
easier as the transmission speed is slowed down. Before starting transmission, follow the steps below.
1
Press
MENU
.
Display:
2
Press
, then
2 3
3
Press
START/SET/COPY
4
Press
or
to select "ON".
If this feature is not required, select "OFF".
5
Press
START/SET/COPY
6
Press
MENU
.
Connecting tone
This feature allows you to hear connecting tones, such as a fax tone, ring back tone or busy tone for several
seconds when you send a fax using the One-Touch Dial or EASY DIAL directory. This will tell you the status of
the other party's machine.
— Fax tone:
The other party's machine is ready for reception.
— Ring back tone: If this tone continues, the other party's machine may not be a facsimile or may have run
out of paper. Check with the other party.
— Busy tone:
The other party's machine is busy. Let the unit continue redialling or press
again later.
This feature is set to "ON" as a pre-selected setting. If this feature is not required, you may turn it off.
1
Press
MENU
.
Display:
2
7 6
Press
, then
3
Press
START/SET/COPY
4
Press
or
to select the desired setting.
If this feature is not required, select "OFF".
5
Press
START/SET/COPY
6
Press
MENU
.
1.SYSTEM SET UP
.
OVERSEAS MODE
.
MODE=OFF
MODE=ON
.
SETUP ITEM [
1.SYSTEM SET UP
.
CONNECTING TONE
.
MODE=ON
.
SETUP ITEM [
Sending Faxes
/
Note:
After transmission, this feature will turn off
automatically.
A slower transmission speed will lengthen
the call duration. Therefore the calling charge
]
may be higher.
This feature is not available for transmission
using the BROADCAST key.
/
]
Note:
The connecting tone volume cannot be
adjusted.
MENU
START/SET/COPY
STOP
and try
MENU
STOP
START/SET/COPY
65