Receiving A Voice Message And Fax Document In One Call - Panasonic KX-FP300E Operating Instructions Manual

Remote operation of your answering machine (remote
activation ID)
Some answering machines will allow you to retrieve voice messages from a remote location. To deactivate the
fax machine while you are checking your messages, set the remote activation ID code for the answering
machine.
Important:
This ID must be different from the fax activation code (p. 83) and the auto disconnection code (p. 87).
1 MENU
Press .
Display:
2
Press , then 1 2
3
Press START/SET/COPY
4
Press or to select "ON".
5 Press
START/SET/COPY
The display will show the pre-selected ID.
6
Enter your ID number.
This ID can be from 1 to 5 digits in length using
0 – 9, and #.
7
Press START/SET/COPY
8 Press MENU .

Receiving a voice message and fax document in one call

The caller can leave a voice message and send a fax document during the same call.
Inform the caller of the following procedures beforehand.
1. The caller calls your fax machine.
The answering machine will answer the call.
2. The caller can leave their message after the greeting message.
3. The caller presses
The fax machine will activate the fax function.
4. The caller presses their start button to send a document.
Note:
The fax activation code can be changed (p. 83).
If the wrong fax activation code is entered, the caller must wait at least 5 seconds to reenter the correct code.
1.SYSTEM SET UP
.
REMOTE TAM ACT.
.
MODE=OFF
MODE=ON
.
ID=11
.
SETUP ITEM [
9 (pre-selected fax activation code).
Receiving Faxes
/
START/SET/COPY
]
MENU
73