Setup Menu - Panasonic TX-26LXD500 Operating Instructions Manual

Setup menu

Press the MODE button to select DVB or Analogue mode.
Press the MENU button.
Move to Setup menu.
Access Setup menu.
Move to menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
Q-Link Allows you to select which AV terminal is to be used for data
communication between this TV and a compatible recording
device. Choose from AV2 and AV4. See page 32.
AV2 / AV4 out Offers a choice of signals to send to the Scart terminal
selected in the Q-Link option. You can choose from the
current TV (Analogue, DVB) programme position, the signal
entering AV1 / AV2 / AV3 / AV4 or Monitor - the picture
displayed on screen.
Component signal input cannot be output to these Scart
terminals.
Teletext Allows you to choose between FASTEXT or List mode.
See page 47-49.
Off timer Switches the TV off within a preset time which you can
choose from between 0 to 90 minutes in 15 minute
intervals.
Power on Set to TV to view picture from TV tuner.
preference Set to AV to view input from an external equipment
connected to a Scart socket, e.g. satellite receiver.
Note:
The external equipment must be switched on and sending
a control signal for automatic switching at power on to
occur.
Tuning Menu Provides access to many other features including
Programme edit and Auto setup. See page 15-17.
DVB Setup Menu Provides access to setup the DVB operations. See page
21.
Owner ID Allows you to enter a security code and address information.
See page 19.
Shipping condition Allows you to clear all tuning information and reset all control
levels back to factory settings. See page 20.
Volume correction During AV, PC and HDMI mode, Volume correction is
displayed.
You can adjust volume level of AV, PC and HDMI mode.
Volume level is memorised.
DVB
Analogue
MODE
MENU
OK
1 2 3
4 5 6
7 8 9
C 0
IDTV
EXIT
Main menu
P i c t u r e menu
Sound menu
Setup menu
Analogue TV mode
Setup menu
Q-Link AV2
Monitor
AV2 out
Teletext FASTEXT
Off timer Off
Power on preference TV
Tuning Menu
Owner ID
Shipping condition
DVB mode
Setup menu
AV2
Q-Link
Monitor
AV2 out
Off
Off timer
TV
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
AV mode
Setup menu
Q-Link AV2
Monitor
AV2 out
Teletext FASTEXT
Off timer Off
Volume correction
Power on preference TV
13