Photo Viewer Setup Menu - Panasonic TC-20LB30 Operating Instructions Manual

Photo Viewer
Photo Viewer Setup Menu
This menu allows you to customize features in the Photo Viewer Setup Menu.
While in the thumbnail mode or the single picture view mode (see page 24)
Press to display the Setup Menu
screen.
Press to select the sub-menu.
Press to adjust or activate the sub-
menu.
Slide Show
Select the sub-menu settings. Select "Start" and press OK to start the slide slqow.
Note:
Press OK again to stop the slide show.
Sub-menu Setting
interval 5Sec, 10Sec, 15Sec, 30Sec, 60Sec, 90Sec or 10Min
Sequence Order or Random
Repeat OFF or ON
Rotate
Select "Left" or "Right" and press OK to rotate the image (see also page 24).
Zoom
(Whime in the single picture view mode only)
Select the magnification of the single picture display and press OK=
Notes:
, Press CN A,CN _, VOL 4, VOL I_ to move the image in the picture frame.
. Press OK again to view the picture in normaI magnification=
Card
Select either "SD" or "PC" when both cards are inserted in the slots.
Press OK to determine the selection.
[] Error messages
"Card is not inserted correctly" Insert a card=
"This type of image is not supported=" The JPEG file is corrupted and cannot be decoded=
"This type of format is not supported=" The card is not formatted with FAT 12 or FAT 16 or if
it is not DCF standard=
" N" ThumbnaiI and main picture cannot be shown=
"PhotoViewercannotsupport over3000 JPEG files." Over 3000 image flies.
"PhotoViewercannotsupportover 8192x 8192 pixels." Resolution over=
"This type of card is not supported=" Incompatible card is inserted=