PC mode
Setup menu
In PC mode
Press the MENU button.
Move to Setup menu.
Access Setup menu.
Move to menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to exit Setup menu.
PC setup
Access to adjust chosen option.
Input
:
Displayed during VGA, WVGA, XGA, WXGA input signals.
resolution
Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise.
Note:
WVGA and WXGA signals may not be displayed properly.
Clock
: If a periodic striped pattern (noise) occurs, carry out adjustments to reduce the noise to the
lowest level.
H-pos
: Adjust the horizontal position.
V-pos
: Adjust the vertical position.
Clock phase : Eliminate the fl ickering and distortion.
Carry out this adjustment after adjusting Clock.
Adjust to reduce noise to the most inconspicuous level.
Sync
: H & V - To synchronize by the horizontal and vertical signals from your PC.
On G - To synchronize by the green signal form your PC (if available).
Volume correction
About settings, see page 13.
H-freq. / V-freq.
If the input signal is not applicable, the characters will turn to red.
For applicable PC signals information see page 57.
Main menu
MENU
P i c t u r e menu
Setup menu
PC setup
Volume correction
PC setup
Input resolution
Clock
EXIT
H-pos
V-pos
Clock phase
Sync
Sound menu
Setup menu
Access
VGA
H & V
37