Dubbing Images Onto A Connected Dvd Recorder Or Video Device - Panasonic HDC-SD1 Operating Instructions Manual

Dubbing images onto a
connected DVD recorder or
video device
This is for dubbing images recorded on this unit
onto a DVD recorder, video device etc.
≥Images are dubbed in standard quality.
≥Use the AC adaptor to free you from worrying
about the battery running down.
1
Connect this unit and a video
device.
B
A AV cable (supplied)
≥Insert the plugs as far as they will go.
≥If your recorder is not equipped with AV Input
Sockets, the 21-pin Adaptor B (optional) is
necessary. Consult your dealer.
2
Set the mode dial to
on the power.
3
Change the input channel on the
video device and TV.
≥The channel set will differ depending on the
terminal to which the unit is connected.
4
Start playback on this unit. Then
start recording on the connected
device.
≥See the operating instructions of the video
device for details.
A
VIDEO IN
AUDIO IN
to turn
To stop dubbing
1) Stop recording on the connected device.
2) Then stop playback on this unit.
≥If the date and time display and function
indication are unnecessary, cancel them before
dubbing. (l 38, 78)
If the dubbed images are played back on a
wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction
of the device you are connecting to or read the
operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
With other products
87
VQT1D38