Manual Focus Adjustment; Picture Adjustment - Panasonic HDC-SD20 Operating Instructions Manual

Manual focus adjustment

If auto focusing is difficult due to the conditions,
then use manual focus.
≥ Press the MANUAL button. (l 70)
1
(When MF assist function is used)
Select the menu. (l 29)
[RECORD SETUP] # [MF ASSIST] # [ON]
≥ This function's default setting is [ON].
2
Touch [MF] icon.
F
WB SHTR
≥ In manual focus mode, [AF] icon appears on
the screen.
3
Adjust the focus by touching
.
MF
MF MF
MF
MF
F
WB SHTR
The centre of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥ The centre of the screen is not enlarged when
[MF ASSIST] is [OFF].
≥ To return to auto focus, touch [AF] icon or
press the MANUAL button again.
≥ MF assist does not work if the zoom
magnification is more than 16k.
≥ The part of the screen that is enlarged is not
enlarged on the image actually recorded.
IRIS MF
MF
MF AF
IRIS

Picture adjustment

Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the
quality of the image.
≥ Press the MANUAL button. (l 70)
1
Select the menu. (l 29)
[RECORD SETUP] # [PICTURE ADJUST]
# [YES]
2
Touch the desired setting items.
[SHARPNESS]:
Sharpness of the edge
[COLOUR]:
Depth of the colour of the image
/
[EXPOSURE]:
Brightness of the image
3
Touch
≥ After adjustments are made if no operations
are performed for about 2 seconds, the bar will
disappear.
4
Touch [ENTER].
≥ Touch [EXIT] or press the MENU button to
complete the settings.
screen.
/ to adjust settings.
appears on the
73
VQT2B44