Microphone Level - Panasonic HDC-SD20 Operating Instructions Manual

Function

Microphone level

[AUTO]:
AGC is activated, and the
recording level is adjusted
automatically.
[SETr ]/[SET]:
The desired recording level
can be set.
AGC: Auto Gain Control
Effect/Setting method
When recording, the input level from the built-in microphones
can be adjusted.
≥ Change the mode to
≥ The intelligent auto mode is set to off. (l 42)
1
Select the menu. (l 29)
[RECORD SETUP] # [MIC LEVEL] # [SETr
≥ Set to [AUTO] to adjust the recording level automatically.
2
Touch / to adjust the microphone input
level.
A Centre
B Front left
C Back left
D Front right
E Back right
F Microphone input level
≥ Touch to activate/disactivate AGC. When AGC is activated,
the icon is surrounded by yellow and the amount of sound
distortion can be reduced. When AGC is disactivated, natural
recording can be performed.
≥ A gain value for each of the 5 direction is displayed. (The input
level of the microphones cannot be set individually.)
≥ Adjust the microphone input level so that the last 2 bars of the
gain value are not red. (Otherwise, the sound is distorted.) Select
a lower setting for microphone input level.
3
Touch [ENTER] to determine the microphone
input level and then touch [EXIT].
G Microphone input level meter
.
]/[SET]
65
VQT2B44