Memory Mirroring Mode - Lenovo ThinkServer TD200 Installation And User Manual

Types 3719, 3821, 3822, and 3823
Hide thumbs Also See for ThinkServer TD200:
Table of Contents

Advertisement

Memory mirroring mode

Memory-mirroring mode replicates and stores data on two pairs of DIMMs within
two channels simultaneously. If a failure occurs, the memory controller switches
from the primary pair of memory DIMMs to the backup pair of DIMMs. You must
enable memory mirroring through the Setup utility. For details about enabling
memory mirroring, see "Using the Setup utility" on page 82. When you use the
memory mirroring feature, consider the following information:
v When you use memory mirroring, you must install a pair of DIMMs at a time.
v Channel 2, DIMM connectors 7, 8, 15, and 16 are not used in memory-mirroring
v The maximum available memory is reduced to half of the installed memory when
The following illustration shows the memory channel interface layout with the DIMM
installation sequence for mirroring mode. The numbers within the boxes indicate the
DIMM population sequence in pairs within the channels, and the numbers next to
the boxes indicate the DIMM connectors within the channels. For example, the
following illustration shows that the first pair of DIMMs (indicated by ones (1) inside
the boxes) should be installed in DIMM connector 3 on channel 0 and DIMM
connector 6 on channel 1. DIMM connectors 7, 8, 15, and 16 on channel 2 are not
used in memory-mirroring mode.
Figure 1. Memory channel interface layout
One DIMM must be in channel 0, and the mirroring DIMM must be in the same
connector in channel 1. The two DIMMs in each pair must be identical in size,
type, rank (single, dual, or quad), and organization. They do not have to be
identical in speed. The channels run at the speed of the slowest DIMM in any of
the channels. See Table 8 on page 66 for the DIMM connectors that are in each
pair.
mode.
memory mirroring is enabled. For example, if you install 64 GB of memory, only
32 GB of addressable memory is available when you use memory mirroring.
1
CPU 1
2
CPU 2
3
QPI
Chapter 5. Installing optional devices and replacing customer replaceable units
65

Advertisement

Table of Contents
loading

Table of Contents