Installing Internal Options; Installing Memory - Lenovo ThinkCentre 6068 Hardware Installation And Replacement Manual

Installing internal options

Installing memory

Your computer has two connectors for installing double date rate 2 dual inline
memory modules (DDR2 DIMMs) that provide up to a maximum of 8.0 GB of
system memory.
When installing memory modules, the following rules apply:
v Use 1.8 V, 240-pin, double data rate 2 synchronous dynamic random access
v Use 256 MB, 512 MB, 1 GB, or 2 GB memory modules in any combination up to
Note: Only DDR2 SDRAM DIMMs can be used.
To install a memory module:
1. Remove the computer cover. See "Removing the cover" on page 9.
2. You might have to remove the drive bay assembly to access the memory
3. Remove any parts that might prevent access to the memory connectors.
4. Locate the memory connectors. See Figure 4 on page 7.
5. Open the retaining clips.
Figure 9. Retaining clips
Important
Read "Handling static-sensitive devices" on page 3 before opening the
computer cover.
memory (DDR2 SDRAM).
a maximum of 8.0 GB.
connectors. See "Accessing system board components and drives" on page 11.
Chapter 3. Installing options and replacing hardware
13