Software - Lenovo ThinkServer TD200 Installation And User Manual

Table 2. Features and specifications
Microprocessor:
® ™
v Intel Xeon dual-core or quad-core with
integrated memory controller and Quick Path
Interconnect (QPI) architecture
v Designed for LGA 1366 socket
v Scalable up to four cores
v 32 KB instruction cache, 32 KB data cache,
and 8 MB cache that is shared among the
cores
v Support for up to two microprocessors, second
microprocessor with pluggable VRM
v Support for Intel Extended Memory 64
Technology (EM64T)
Note: Use the Setup utility to determine the type
and speed of the microprocessors. For a list of
supported microprocessors, see
http://www.lenovo.com/thinkserver and click
Options.
Memory:
v Sixteen DIMM connectors (eight per
microprocessor)
v Minimum: 2 GB DIMM per microprocessor
v Maximum: 64 GB
v Type: Registered ECC double-data-rate 3
(DDR3) 800, 1066, and 1333 MHz DIMMs only
v Sizes: 1 GB single-rank, 2 GB single-rank or
dual-rank, 4 GB dual-rank (PC3-10600R-999)
Drives:
v SATA:
– DVD (standard)
– DVD/CD-RW (optional)
– Maximum of two devices can be installed
v Diskette (optional): External USB 1.44 MB
v Supported hard disk drives:
– Serial Attached SCSI (SAS)
Expansion bays:
v Sixteen hot-swap SAS 2.5-inch bays
v Three half-high 5.25-inch bays (one DVD drive
installed)
Note: Full-high devices such as an optional
tape drive will occupy two half-high
5.25-inch bays.
PCI and PCI-X expansion slots:
v Six PCI expansion slots on system board
– Two PCI Express x8 (x4 link)
– Two PCI Express x8 (x8 link)
– One PCI Express x16 (x8 link)
– One PCI 32-bit
v One PCI Express x8 (x4 link) on the extender
card
Power supply:
Note: To upgrade to two 920-watt hot-swap
power supplies, install the redundant power and
cooling option kit. Kit includes one hot-swap
920-watt power-supply and three hot-swap fans.
v Standard: One 920-watt 110 V or 240 V ac
input dual-rated power supply
v Upgradeable to two 920-watt hot-swap power
supplies

Software

Lenovo provides software to help get your server up and running.
10
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Installation and User Guide
Hot-swap fans:
v Three (standard)
v Upgradeable to six fans (for redundant
cooling)
Note: To upgrade to redundant cooling, install
the redundant power and cooling option kit. Kit
includes one 920-watt hot-swap power-supply
and three hot-swap fans.
Size:
v Tower
– Height: 440 mm (17.3 in.)
– Depth: 767 mm (30.2 in.)
– Width: 218 mm (8.6 in.)
– Weight: approximately 38 kg (84 lb) when
fully configured or 20 kg (42 lb) minimum
Integrated functions:
v Integrated management module (IMM), which
provides service processor control and
monitoring functions, video controller, remote
keyboard, video, mouse, and remote hard
disk drive capabilities
v Dedicated or shared management network
connections
v Six-port Serial ATA (SATA) controller
v Serial over LAN (SOL) and serial redirection
over Telnet or Secure Shell (SSH)
v Support for remote management presence
v One systems-management RJ-45 for
connection to a dedicated
systems-management network
v EasyLED diagnostics
v Six Universal Serial Bus (USB) ports
standard (v2.0 supporting v1.1)
– Four on rear of server
– Two on front of server
v One internal USB tape connector
v One Broadcom dual-port 10/100/1000
Ethernet controller with Wake on LAN
support and TCP/IP Offload Engine (TOE)
support
v One serial connector, shared with the IMM
Note: In messages and documentation, the
term service processor refers to the integrated
management module (IMM).
Video controller:
v Matrox G200 video on system board
v Compatible with SVGA and VGA
v 8 MB DDR2 SDRAM video memory
Note: Maximum video resolution 1600 x
1200 at 85 MHz
RAID controllers:
v ServeRAID-BR10i SAS/SATA Controller that
supports RAID levels 0, 1, 1E (standard)
v Upgradeable to ServeRAID-MR10i SAS/SATA
Controller, which supports RAID levels 0, 1, 5,
6, 10
v Upgradeable to ServeRAID-MR10is SAS/SATA
Controller, which supports RAID levels 0, 1, 5,
6, 10
Acoustical noise emissions:
v Sound power, idle: 5.5 bel declared
v Sound power, operating: 6.0 bel declared
Environment:
v Air temperature:
– Server on: 10° to 35°C (50.0° to 95.0°F);
altitude: 0 to 914.4 m (3000 ft)
– Server off: -40° to 60°C (-40.0° to 140.4°F);
maximum altitude: 2133.6 m (7000 ft)
v Humidity:
– Server on: 8% to 80%
– Server off: 8% to 80%
Heat output:
Approximate heat output in British thermal units
(Btu) per hour:
v Minimum configuration: 2013 Btu per hour (590
watts)
v Maximum configuration: 3610 Btu per hour
(1058 watts)
Electrical input:
v Sine-wave input (50-60 Hz) required
v Input voltage low range:
– Minimum: 100 V ac
– Maximum: 127 V ac
v Input voltage high range:
– Minimum: 200 V ac
– Maximum: 240 V ac
v Approximate input kilovolt-amperes (kVA):
– Minimum: 0.60 kVA
– Maximum: 1.10 kVA
Notes:
1. Power consumption and heat output vary
depending on the number and type of optional
features that are installed and the
power-management optional features that are
in use.
2. These levels were measured in controlled
acoustical environments according to the
procedures that are specified by the American
National Standards Institute (ANSI) S12.10 and
ISO 7779 and are reported in accordance with
ISO 9296. Actual sound-pressure levels in a
given location might exceed the average stated
values because of room reflections and other
nearby noise sources. The declared
sound-power levels indicate an upper limit,
below which a large number of computers will
operate.