Delivery Contents; Description Of The Appliance; Starting Up; Producing Ice Cubes - Bifinett KH 670 Operating Instructions Manual

KH670_EU 09.10.2006

Delivery Contents

Ice Cube Machine
Ice cube collecter container
Operating instructions
Warranty card

Description of the appliance

Device
Lid
Cooling/Heating pipes
Ice cube collecter container
Water reservoir (ca. 3,5 Liter)
Control panel
Drainage valve at the rear of the
Ice Cube Machine
Control panel
Control lamps - ice cube size
Display - „Content level - Ice cube
collector container"
Display - „Content level -
Water reservoir"
Button - ON/OFF
Control lamp ON/OFF
Button - Ice cube size

Starting up

Before starting up the appliance, make
certain that ...
- the appliance, power plug and power
cable are in a faultless condition and
- all packaging materials have been
removed from the Ice Cube Machine.
First of all, clean the appliance as
described in the chapter „Cleaning
and Care".
8:33 Uhr Seite 11
- 11 -
Note: Allow the Ice Cube Machine to
stand undisturbed for 12 hours before
taking it into use, this will permit the
cooling agent to settle and allow the
appliance to adjust itself to the am-
bient temperature.
Important: Never cover the ventila-
tion slots. Ensure it is placed at a
sufficient distance from walls
(min.15cm).

Producing ice cubes

1. Place the power plug in a wall socket.
The control lamp ON/OFF
showing the standby readiness of the
Ice Cube Machine.
Note: Only use drinking water for
the production of ice cubes.
Note: For health and hygiene reasons
you should dispose of the ice cubes
produced in the first production cycle
and not use them for the cooling of
foodstuffs or drinks.
2. Open the lid and remove the ice
cube collector container
appliance.
3. Pour water in up to the fill marking
("Fill Line") inside the water reservoir
. The water reservoir holds ca.
3,5 Liters .
Note: To achieve correctly sized ice
cubes the water temperature must
lie between 7˚C and 32˚C.
bifinett KH 670
flashes,
from the