Checking Connection Status - LG F8010P Owner's Manual

Digital Photo Frame
Network Setup
Connecting to an AP by Using IP Configuration
In addition to using the 3 connection methods provided in Wi-Fi Configuration, you can use the
options in IP Configuration too as follows.
Go to Setup -> Network -> IP Configuration -> Static IP Address:
In the Static IP Address page, use the on-screen keyboard to enter your IP address, subnet
mask, gateway, and DNS server. Then, select OK and press
network.
Note
If you entered an incorrect IP address in the IP Address field, you will not be able to connect to the
wireless network. To fix this problem, select the DHCP option in IP Configuration and press
enable the AP to automatically assign an IP address. Once the IP address is assigned, you can connect
to the wireless network.
To view the IP address, go to Setup -> Network -> Current Network Information. Press
find the information about the IP address.

Checking Connection Status

You can check the network status in Setup -> Network -> Current Network Information.
If the "Status" item shows "Enable" and the "Connecting" item shows "Yes", it indicates that the
product has been connected to a wireless network.
If the "Status" item shows "Disable" and the "Connecting" item shows "No", it indicates that the
product has not been connected to any wireless network.
To exit the Current Network Information page, press
For additional information or troubleshooting about your network configuration, contact your network
administrator or network service provider.
to connect to the wireless
Checking Connection Status
or .
28
to
/ to