Table of Contents
Advertisement
Digital Photo Frame
Network Setup
Connecting to a WPS-enabled AP
1
Press
/
in Home Menu, and then press
3
In Wi-Fi Configuration, press
to select WPS, and then press
• When using Push Button Method, the
5
product will start to search for your AP.
Push the button on your WPS AP within
the time shown.
• When using PIN Method, enter the PIN
code displayed on the product in your AP.
Select OK, and then press
finished.
Once completed, the Current Network
7 7
Information page will appear and show the
connection status and other network
information. (
Note
For additional information about your network configuration, contact your network administrator or
network service provider.
/
/
to select Setup
and
.
when
Page 28)
2
Press
.
Setup, and then press
Depending on how the Wi-Fi Protected
4
Setup (WPS) AP was enabled, you can use
Push Button Method or PIN Method.
Follow the remaining on-screen instructions
6
to successfully establish the connection.
26
/
to select Network in
.
Advertisement
Table of Contents
