Table of Contents
Advertisement
Digital Photo Frame
Product Installation and Connection
PC connection
2
3
Memory card slot
(SD/MS/xD/MMC)
Note
The internal memory of the product is 2 GB. If the memory is full, no more files are saved.
Two or more external devices can be connected to the product at the same time.
Do not turn the product off or remove external devices while moving, saving, playing or deleting files.
Removing external devices during file playback may cause the product to malfunction. When this
happens, turn the power off and on again.
When connecting external storage devices to the product, use the cables included with the devices. (For
more information on storage devices and cable purchase, contact the relevant service centers for help.)
This product doesn't support any external hard drives and card readers.
When connecting the product to a PC by the USB cable, the disk volume name (Ex: E:, F:, G:, and so
on) of the removable disk may vary depending on computer circumstance.
1. Please connect to product's USB terminal using a provided USB cable.
2. Please connect to PC's USB terminal.
3. If PC is read, a window pops up as below. Please select the mode you want use
from Mass Storage and Mini Monitor.
1. Make sure the memory card is in the correct
orientation.
2. Please push into the slot.
3. If external memory card is read, a window pops
up as below. Please select an operation you
want.
11
SD/MS/xD/MMC
xD
SD
MMC
MS
Advertisement
Table of Contents
