Adjusting The Balance Of The Front Speakers; Basic Play - Panasonic SC-PT70 Operating Instructions Manual

1
Press [OK]9 to enter test tone mode.
e.g.
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFT
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT, SURROUND RIGHT,
SURROUND LEFT
2
Press [OK]9 then [3, 4]9 to adjust the speaker
level for each speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
`6 dB to i6 dB (Factory preset: 0 dB)
≥To exit the screen, press [SETUP];.
To adjust speaker level during play
[Effective only when "5.1ch layout" mode is selected in
"Speakers position" (
playing 5.1-channel sound.]
1 Press and hold [—CH SELECT]; to select the
speaker.
While the speaker channel is displayed, press
[—CH SELECT];.
L# C# R# RS# LS# SW
^---------------------------------------------}
≥You can adjust SW (Subwoofer) only if the disc
includes a subwoofer channel.
≥"S" appears on this unit's display when you have
selected "S.SRD" (
effects). In this case, you can adjust both surround
speaker levels at the same time using [3, 4]9.
S: `6 dB to i6 dB
2 Press [3]9 (increase) or [4]9 (decrease) to
adjust the speaker level for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.) (

Adjusting the balance of the front speakers

1
Press and hold [—CH SELECT]; to select "L" or
"R".
2
While "L" or "R" is selected, press [2, 1]9.

Basic play

Preparation
To display the picture, turn on your TV and change its
video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit
the connections to this unit.
1
Press [Í/I]1 or [Í]1 to turn on the unit.
2
Press [DVD]@ to select "DVD/CD".
3
Press [< OPEN/CLOSE]2 to open the disc tray.
4
Load the disc.
≥Load double-sided discs so the
label for the side you want to play
is facing up.
5
Press [1]8 or [1 PLAY]5 to start play.
≥Press [r, s VOL]6/> to adjust the volume.
12
TRIM LEVEL
− −
0dB
− −
0dB
0dB
9, Easy setup settings) and
11, Enjoying surround sound
below)
Label facing up
[Note]
≥DISC CONTINUES TO ROTATE WHILE MENUS ARE
DISPLAYED.
To preserve the unit's motor and your TV screen, press
[∫ STOP]5 when you are finished with the menus.
≥Total title number may not be displayed properly on
iR/iRW.
≥ABOUT DIVX VIDEO:
DivX is a digital video format created by DivX, Inc. This
®
is an official DivX Certified device that plays DivX video.
Basic controls
One touch play (remote control only): [1 PLAY]5
(during standby mode)
This unit automatically turns on and starts playing the
disc in the tray.
Stop: [∫ STOP]5
The position is memorised while "RESUME STOP" is on
the screen.
≥Press [1 PLAY]5 to resume.
≥Press [∫ STOP]5 again to clear the position.
Pause: [; PAUSE]5
≥Press [1 PLAY]5 to restart play.
Skip: [:, 9 SKIP]5
Search: [6, 5]5 (during play)
≥Up to 5 steps.
≥Press [1 PLAY]5 to start normal play.
Slow-motion: [6, 5]5 (during pause)
≥[VCD] Slow-motion: Forward direction only.
≥[MPEG4] [DivX] Slow-motion: Does not work.
Frame-by-frame: [2;, ;1]9 (during pause)
[DVD-VR] [DVD-V] [VCD]
≥[DVD-VR] [VCD] Forward direction only.
On-screen item select: [3, 4, 2, 1, OK]9
[3, 4, 2, 1]9: Select
[OK]9: Confirm
Enter number: Numbered buttons
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12: [S10]3
[VCD] with playback control
Press [∫ STOP]5 to cancel the PBC function, and then
press the numbered buttons.
[DVD-V] Show a disc top menu: [TOP MENU]8
[DVD-V] Show a disc menu: [MENU]:
Return to previous screen: [RETURN]E
[VCD] (with playback control) Show a disc menu:
[RETURN]E
This unit display: [FL DISPLAY]G
[DVD-VR] [DVD-V] [WMA] [MP3] [MPEG4] [DivX]
Time display ,-. Information display (e.g. [DVD-VR]
Program number)
[JPEG]
SLIDE,-.Contents number
[1] [2]