Radio Antenna Connections; Audio And Video Connections - Panasonic SC-PT70 Operating Instructions Manual

2

Radio antenna connections

Using an indoor antenna
Adhesive tape
FM ANT
(75 )
This unit (rear)
3

Audio and video connections

Basic setup example

Scart cable
(not included)
TV (not included)
AV
This unit (rear)
Other video connection
[\\\\\\\\\\\HDMI\AV\OUT\\\\\\\\\]
This connection provides the best picture quality.
Connect the HDMI cable (not included) from the
HDMI AV OUT terminal on this unit to the HDMI AV
IN terminal on your TV.
≥Set "VIDEO PRIORITY" to "ON" (
≥Set "VIDEO FORMAT" in Menu 4 (HDMI) (
VIERA Link "HDAVI Control"
If your Panasonic TV is VIERA Link compatible, you can
operate your TV synchronising with home theater
operations or vice versa (
"HDAVI Control ").
TM
≥Make the extra audio connection (
use VIERA Link "HDAVI Control" function.
[Note]
≥Non-HDMI-compliant cables cannot be utilized.
≥It is recommended that you use Panasonic's HDMI
cable. Recommended part number:
RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m),
RP-CDHG50 (5.0 m), etc.
≥For TV with more than one HDMI terminal, refer to the
operating instructions for the TV to determine which
terminal to connect to.
≥Do not make the video connections through the
VCR.
Due to copy guard protection, the picture may not be
displayed properly.
≥Only one video connection is required. Choose one of
the video connections above depending on your TV.
8
FM indoor antenna
(included)
Affix this end of the antenna
where reception is best.
Set top box
(STB) or VCR
(not included)
AV2
AV OUT
AV1
Scart cable (not included)
19, HDMI menu).
16, Using the VIERA Link
right) when you
Using an outdoor antenna
Use outdoor antenna if radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical
storm.
This unit
(rear)
FM ANT
(75 )
This connection will also enable you to play TV
§
audio through your home theater system (
Selecting the source by the remote control). Select
the appropriate audio out (e.g. Monitor) on the TV.
If Scart terminal is not available on your TV, use
AUX/TV connection (
≥When both the HDMI cable and scart cable are
connected, there will be no RGB output from the
SCART (AV) terminal.
Other audio connection
[\\\\\\\\\AUX/TV\\\\\\\\]
This connection enables you to play audio from your TV,
STB or VCR through your home theater system (
Selecting the source by the remote control).
Connect the audio cable (not included) from the
AUX/TV terminal on this unit to the AUDIO OUT
terminal on your TV.
16).
[Note]
If you have various sound sources (such as Blu-ray
player, DVD recorder, VCR, etc.), connect them to the
available inputs on the TV and the TV output should
then be connected to the AUX/TV terminal of this unit.
FM outdoor antenna
Use the antenna [Using a TV antenna
(not included)]
plug adaptor
(included). The antenna should
be installed by a
competent technician.
75  coaxial cable
(not included)
below).
10,
10,